Rack and Pinion Components | Precision Linear Motion Parts | Nidec Drive Technology America - Nidec Drive Technology Corporation https://www.nidec-dtc.com/product-category/rack-and-pinion/rack-and-pinion-components/ Precision Gearing Technologies and Solutions Fri, 17 Jan 2025 19:27:04 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://www.nidec-dtc.com/wp-content/uploads/2024/05/cropped-nidec-tb-ico-32x32.png Rack and Pinion Components | Precision Linear Motion Parts | Nidec Drive Technology America - Nidec Drive Technology Corporation https://www.nidec-dtc.com/product-category/rack-and-pinion/rack-and-pinion-components/ 32 32 ISO9409-1-A Helical Small Pinion https://www.nidec-dtc.com/product/iso9409-1-a-helical-small-pinion/ Sun, 13 Oct 2024 19:04:04 +0000 http://www.nidec-dtc.com/?post_type=product&p=5124 Each component of the system—gearbox, rack and pinion—is optimized to meet these demands. Although we focus on highly dynamic applications, we also offer more cost-effective options for less challenging axes.

Helical and straight racks are both available, from module 1.5 to module 12, with quality levels from 5 to 10 and lengths up to 3000mm. Our core products are induction hardened and ground, but we can offer a variety of heat treatment and surface finish options. Pinions are offered for keyed shaft or ISO9409-1-A mounting interfaces.

The post ISO9409-1-A Helical Small Pinion appeared first on Nidec Drive Technology Corporation.

]]> Features
  • High precision ISO9409-1-A small helical pinion for heavy loads and ultra-high accuracy and exceptional linear stiffness
  • Mod Sizes 2 / 3 / 4 / 5 / 6
  • Quality level 5
  • 20MnCr5 steel composition, case hardened and ground with 60 HRC
  • Compact connection to VRT or EVT gearheads
  • Small pitch diameter allows reduction of the gearbox frame size and ratio
  • Factory assembled

The post ISO9409-1-A Helical Small Pinion appeared first on Nidec Drive Technology Corporation.

]]> ISO9409-1-A Helical Large Pinion https://www.nidec-dtc.com/product/iso9409-1-a-helical-large-pinion/ Sun, 13 Oct 2024 19:02:07 +0000 http://www.nidec-dtc.com/?post_type=product&p=5122 Each component of the system—gearbox, rack and pinion—is optimized to meet these demands. Although we focus on highly dynamic applications, we also offer more cost-effective options for less challenging axes.

Helical and straight racks are both available, from module 1.5 to module 12, with quality levels from 5 to 10 and lengths up to 3000mm. Our core products are induction hardened and ground, but we can offer a variety of heat treatment and surface finish options. Pinions are offered for keyed shaft or ISO9409-1-A mounting interfaces.

The post ISO9409-1-A Helical Large Pinion appeared first on Nidec Drive Technology Corporation.

]]> Features
  • High precision ISO9409-1-A helical pinion for heavy loads and ultra-high accuracy
  • Mod Sizes 2 / 3 / 4 / 5 / 6
  • Quality level 5
  • 20MnCr5 steel composition, case hardened and ground with 60 HRC
  • Compact connection to VRT or EVT gearheads
  • High move speeds with low lower input speed using large pitch diameter
  • Factory assembled

The post ISO9409-1-A Helical Large Pinion appeared first on Nidec Drive Technology Corporation.

]]> Keyed Helical Pinion https://www.nidec-dtc.com/product/keyed-helical-pinion/ Sun, 13 Oct 2024 18:59:04 +0000 http://www.nidec-dtc.com/?post_type=product&p=5120 Each component of the system—gearbox, rack and pinion—is optimized to meet these demands. Although we focus on highly dynamic applications, we also offer more cost-effective options for less challenging axes.

Helical and straight racks are both available, from module 1.5 to module 12, with quality levels from 5 to 10 and lengths up to 3000mm. Our core products are induction hardened and ground, but we can offer a variety of heat treatment and surface finish options. Pinions are offered for keyed shaft or ISO9409-1-A mounting interfaces.

The post Keyed Helical Pinion appeared first on Nidec Drive Technology Corporation.

]]> Features
  • Keyed helical pinion with optimized tooth geometry
  • Mod Sizes 1.5 / 2 / 3 / 4
  • Quality level 6
  • 20MnCr5 steel composition, case hardened and ground with 60 HRC
  • Shrink _t connection ensures reliable positioning of the pinion
  • Factory assembled

The post Keyed Helical Pinion appeared first on Nidec Drive Technology Corporation.

]]> Racks https://www.nidec-dtc.com/product/racks/ Sun, 13 Oct 2024 18:53:42 +0000 http://www.nidec-dtc.com/?post_type=product&p=5118 Each component of the system—gearbox, rack and pinion—is optimized to meet these demands. Although we focus on highly dynamic applications, we also offer more cost-effective options for less challenging axes.

Helical and straight racks are both available, from module 1.5 to module 12, with quality levels from 5 to 10 and lengths up to 3000mm. Our core products are induction hardened and ground, but we can offer a variety of heat treatment and surface finish options. Pinions are offered for keyed shaft or ISO9409-1-A mounting interfaces.

The post Racks appeared first on Nidec Drive Technology Corporation.

]]> Racks
  • Helical or straight cut profiles
  • Modules 1.5 / 2 / 3 / 4 / 5 / 6 / 8 / 10 / 12
  • Quality levels 5 through 10
  • One-piece lengths of 0.5m, 1m, 2m and 3m available
  • Materials: SAE 1141, C45E, 42CrMo4, 16MnCr5
  • Heat treatments: Case hardening, carburizing with induction hardening and induction hardening. HRC 55-60
  • Ground (all surfaces) or milled surface finishes
  • Total pitch error as low as ± 0.028
  • Readily available: Mod 2/3/4, SAE 1141, Q6, 1m length, ground

The post Racks appeared first on Nidec Drive Technology Corporation.

]]>